Danchuk 1955-1957 Chevy Window Regulator Rollers and Rivet, 1/4'' Diameter Rivet

×

 

Item Number: 1001

Qty:
Your Price:   EA
In Stock
Qty:
×
WARNING! This product contains a chemical known to the State Of California to cause cancer and/or birth defects or reproductive harm.  www.p65warnings.ca.gov

These rollers install on the end of the window regulator arms and slide into the window channels.  If these parts are missing or cracked, window operation can be difficult or impossible.  Replacing these when you have your doors apart will make sure you have perfecly functioning windows.  Danchuk # 1001 will work on any 1955-1957 classic Chevy that uses a 1/4" rivet.  Three required per window; 12 per car.  Made in the USA. 

Watch the Install Video Here
.

Note:  There were two different sized rivets that Chevy used to mount these rollers, 1/4" and 5/16".  Make sure you are getting the correct size for your classic or the rollers will not work properly.

Danchuk has the largest selection of quality 55, 56, 57 parts for your classic Chevy project.